安裝java server 版本
server-jre-7u76-linux-x64.gz
下載完成，解壓縮到
/usr/java/jdk1.7.0_76
設定方式參考
reference
vi + /etc/profile
加入
JAVA_HOME=/usr/java/jdk1.7.0_76
JRE_HOME=/usr/java/jdk1.7.0_76/jre
PATH=$PATH:$JAVA_HOME/bin:$JRE_HOME/bin
CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar:$JRE_HOME/lib
export JAVA_HOME JRE_HOME PATH CLASSPATH
執行後生效
[admin@msigap1]source /etc/profile
[admin@msigap1]echo $PATH
[admin@msigap1 etc]$ echo $PATH
/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/usr/java/jdk1.7.0_76/bin:/usr/java/jdk1.7.0_76/jre/bin:/home/admin/.local/bin:/home/admin/bin
***開始安裝Weblogic***
[admin@msigap1 ~]$ java -jar -D64 fmw_12.1.3.0.0_wls.jar
Launcher log file is /tmp/OraInstall2015-02-24_11-01-50AM/launcher2015-02-24_11-01-50AM.log.
Extracting files..............
Starting Oracle Universal Installer
Checking if CPU speed is above 300 MHz. Actual 1999.992 MHz Passed
Checking monitor: must be configured to display at least 256 colors. DISPLAY environment variable not set. Failed <<<<
Checking swap space: must be greater than 512 MB. Actual 4194296 MB Passed
Checking if this platform requires a 64-bit JVM. Actual 64 Passed (64-bit not required)
Checking temp space: must be greater than 300 MB. Actual 12547 MB Passed
Some system prerequisite checks failed.
You must fulfill these requirements before continuing with the installation.
Continue? (yes [y] / no [n]) [n]
y
You have confirmed that the product can be installed on this platform.
Continuing with the installation.
>>> Ignoring failure(s) of required prerequisite checks. Continuing...
Preparing to launch the Oracle Universal Installer from /tmp/OraInstall2015-02-24_11-01-50AM
DISPLAY is not set. Please set the DISPLAY environment variable and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: %% setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
%% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
%%
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
at java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:207)
at java.awt.Window.(Window.java:535)
at java.awt.Frame.(Frame.java:420)
at java.awt.Frame.(Frame.java:385)
at javax.swing.SwingUtilities$SharedOwnerFrame.(SwingUtilities.java:1757)
at javax.swing.SwingUtilities.getSharedOwnerFrame(SwingUtilities.java:1832)
at javax.swing.JDialog.(JDialog.java:271)
at javax.swing.JDialog.(JDialog.java:205)
at javax.swing.JDialog.(JDialog.java:153)
at oracle.as.install.engine.modules.presentation.ui.common.dialogs.SpecifyInventoryDirectoryDialog.(SpecifyInventoryDirectoryDialog.java:235)
at oracle.as.install.engine.modules.presentation.ui.common.dialogs.SpecifyInventoryDirectoryDialog.showDialog(SpecifyInventoryDirectoryDialog.java:761)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:616)
Logs are located here: /tmp/OraInstall2015-02-24_11-01-50AM.
[admin@msigap1 ~]$ su - root
Password:
Last login: Tue Feb 3 09:54:14 CST 2015 on pts/0
[root@msigap1 ~]# groupadd -g 1000 oinstall
groupadd: group 'oinstall' already exists
[root@msigap1 ~]# useradd -u 1100 -g oinstall oracle
useradd: user 'oracle' already exists
[root@msigap1 ~]# passwd oracle
Changing password for user oracle.
New password:
BAD PASSWORD: The password fails the dictionary check - it is based on a dictionary word
Retype new password:
passwd: all authentication tokens updated successfully.
[root@msigap1 ~]# mkdir -p /u01/app/oracle/middleware
[root@msigap1 ~]# chown -R oracle:oinstall /u01
[root@msigap1 ~]# chmod -R 775 /u01/
[root@msigap1 ~]#vi /home/oracle/.bash_profile
# User specific environment and startup programs
MW_HOME=/u01/app/oracle/middleware; export MW_HOME
WLS_HOME=$MW_HOME/12.1.3.0/wlserver; export WLS_HOME
JAVA_HOME=/usr/java/jdk1.7.0_76/; export JAVA_HOME
PATH=$JAVA_HOME/bin:$PATH; export PATH
# JDK 7 Requirement
USER_MEM_ARGS="-Xms32m -Xmx200m -XX:MaxPermSize=350m"
PATH=$PATH:$HOME/.local/bin:$HOME/bin
export PATH
[oracle@msigap1 ~]$ java -jar -D64 fmw_12.1.3.0.0_wls.jar -silent -responseFile /home/oracle/response/wls.rsp -invPtrLoc /home/oracle/oraInst.loc
Launcher log file is /tmp/OraInstall2015-02-24_11-59-04AM/launcher2015-02-24_11-59-04AM.log.
Extracting files.........
Starting Oracle Universal Installer
Checking if CPU speed is above 300 MHz. Actual 1999.992 MHz Passed
Checking swap space: must be greater than 512 MB. Actual 4194296 MB Passed
Checking if this platform requires a 64-bit JVM. Actual 64 Passed (64-bit not required)
Checking temp space: must be greater than 300 MB. Actual 7042 MB Passed
Preparing to launch the Oracle Universal Installer from /tmp/OraInstall2015-02-24_11-59-04AM
Log: /tmp/OraInstall2015-02-24_11-59-04AM/install2015-02-24_11-59-04AM.log
Copyright (c) 1996, 2014, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Starting check : CertifiedVersions
Expected result: One of enterprise-4,enterprise-5,enterprise-6,redhat-6,redhat-4,redhat-5,SuSE-11
Actual Result: (Unknown
Check complete. The overall result of this check is: Failed <<<<
Problem: This Oracle software is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
Warning: Check:CertifiedVersions failed.
Starting check : CheckJDKVersion
Expected result: 1.7.0_15
Actual Result: 1.7.0_76
Check complete. The overall result of this check is: Passed
CheckJDKVersion Check: Success.
Validations are enabled for this session.
Verifying data......
[ERROR] Data Insufficient to start Install.
[ERROR] Rule_VDiskSpace_Error
[ERROR] Rule_OHFS_Error
[ERROR] Provide a value for variable ORACLE HOME PATH
[ERROR] Rule_GetOracleHome_Error
[ERROR] Rule_VDiskSpace_Error
[ERROR] Select one and only one Install Type. Any one of the variables SOFTWARE ONLY TYPE,BASIC TYPE or ADVANCED TYPE in Section GENERIC must be set to true.
[ERROR] Rule_CalculateFreeSpace_Error. Aborting Install
Logs are located here: /tmp/OraInstall2015-02-24_11-59-04AM.
https://www.centos.org/forums/viewtopic.php?t=41411
[oracle@msigap1 ~]$ java -jar fmw_12.1.3.0.0_wls.jar -silent -responseFile /home/oracle/response/wls.rsp -invPtrLoc /home/oracle/oraInst.loc -ignoreSysPrereqs
Launcher log file is /tmp/OraInstall2015-02-24_01-53-40PM/launcher2015-02-24_01-53-40PM.log.
Extracting files.........
Starting Oracle Universal Installer
Checking if CPU speed is above 300 MHz. Actual 1999.992 MHz Passed
Checking swap space: must be greater than 512 MB. Actual 4194296 MB Passed
Checking if this platform requires a 64-bit JVM. Actual 64 Passed (64-bit not required)
Checking temp space: must be greater than 300 MB. Actual 3356 MB Passed
Preparing to launch the Oracle Universal Installer from /tmp/OraInstall2015-02-24_01-53-40PM
Log: /tmp/OraInstall2015-02-24_01-53-40PM/install2015-02-24_01-53-40PM.log
Copyright (c) 1996, 2014, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Validations are enabled for this session.
Verifying data......
[ERROR] Data Insufficient to start Install.
[ERROR] Rule_VDiskSpace_Error
[ERROR] Rule_OHFS_Error
[ERROR] Provide a value for variable ORACLE HOME PATH
[ERROR] Rule_GetOracleHome_Error
[ERROR] Rule_VDiskSpace_Error
[ERROR] Select one and only one Install Type. Any one of the variables SOFTWARE ONLY TYPE,BASIC TYPE or ADVANCED TYPE in Section GENERIC must be set to true.
[ERROR] Rule_CalculateFreeSpace_Error. Aborting Install
Logs are located here: /tmp/OraInstall2015-02-24_01-53-40PM.
http://www.cemdogan.com/2014/10/07/weblogic-12-1-3-silent-mode-installation/
http://middlewaresnippets.blogspot.tw/2013/08/weblogic-12c-starting-and-stopping.html
經過以上的錯誤,整理一下
vi /home/oracle/oraInst.loc
inventory_loc=/home/oracle/oraInventory/
inst_group=oinstall
[oracle@msigap1 response]$ vi wls.rsp
[ENGINE]
#DO NOT CHANGE THIS.
Response File Version=1.0.0.0.0
[GENERIC]
#The oracle home location. This can be an existing Oracle Home or a new Oracle Home
ORACLE_HOME=/u01/app/oracle/middleware/12.1.3.0
#Set this variable value to the Installation Type selected. e.g. WebLogic Server, Coherence, Complete with Examples.
INSTALL_TYPE=WebLogic Server
#Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name.
MYORACLESUPPORT_USERNAME=
#Provide the My Oracle Support Password
MYORACLESUPPORT_PASSWORD=
#Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration
DECLINE_SECURITY_UPDATES=true
#Set this to true if My Oracle Support Password is specified
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
#Provide the Proxy Host
PROXY_HOST=
#Provide the Proxy Port
PROXY_PORT=
#Provide the Proxy Username
PROXY_USER=
#Provide the Proxy Password
PROXY_PWD=
#Type String (URL format) Indicates the OCM Repeater URL which should be of the format [scheme[Http/Https]]://[repeater host]:[repeater port]
COLLECTOR_SUPPORTHUB_URL=
# User specific environment and startup programs
MW_HOME=/u01/app/oracle/middleware/12.1.3.0; export MW_HOME
WLS_HOME=$MW_HOME/wlserver; export WLS_HOME
export WL_HOME=$MW_HOME/wlserver/
JAVA_HOME=/usr/java/jdk1.7.0_76/; export JAVA_HOME
PATH=$JAVA_HOME/bin:$PATH; export PATH
# JDK 7 Requirement
USER_MEM_ARGS="-Xms32m -Xmx200m -XX:MaxPermSize=350m"
export CONFIG_JVM_ARGS="-Djava.security.egd=file:/dev/./urandom"
PATH=$PATH:$HOME/.local/bin:$HOME/bin
export PATH
終於成功
[oracle@msigap1 ~]$ java -jar -d64 fmw_12.1.3.0.0_wls.jar -silent -responseFile /home/oracle/response/wls.rsp -invPtrLoc /home/oracle/oraInst.loc -ignoreSysPrereqs
Launcher log file is /tmp/OraInstall2015-02-24_02-55-10PM/launcher2015-02-24_02-55-10PM.log.
Extracting files.........
Starting Oracle Universal Installer
Checking if CPU speed is above 300 MHz. Actual 1999.992 MHz Passed
Checking swap space: must be greater than 512 MB. Actual 4194296 MB Passed
Checking if this platform requires a 64-bit JVM. Actual 64 Passed (64-bit not required)
Checking temp space: must be greater than 300 MB. Actual 1489 MB Passed
Preparing to launch the Oracle Universal Installer from /tmp/OraInstall2015-02-24_02-55-10PM
Log: /tmp/OraInstall2015-02-24_02-55-10PM/install2015-02-24_02-55-10PM.log
Copyright (c) 1996, 2014, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Validations are enabled for this session.
Verifying data......
Copying Files...
You can find the log of this install session at:
/tmp/OraInstall2015-02-24_02-55-10PM/install2015-02-24_02-55-10PM.log
-----------20%----------40%----------60%----------80%--------100%
The installation of Oracle Fusion Middleware 12c WebLogic Server and Coherence 12.1.3.0.0 completed successfully.
Logs successfully copied to /home/oracle/oraInventory/logs.
create domain
[oracle@msigap1 bin]$ pwd
/u01/app/oracle/middleware/12.1.3.0/wlserver/common/bin
[oracle@msigap1 bin] ./commEnv.sh
[oracle@msigap1 bin]$ ./wlst.sh
Initializing WebLogic Scripting Tool (WLST) ...
Jython scans all the jar files it can find at first startup. Depending on the system, this process may take a few minutes to complete, and WLST may not return a prompt right away.
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> readTemplate('/u01/app/oracle/middleware/12.1.3.0/wlserver/common/templates/wls/wls.jar')
wls:/offline/base_domain>cd('Servers/AdminServer')
wls:/offline/base_domain/Server/AdminServer>set('ListenAddress','192.168.1.22')
wls:/offline/base_domain/Server/AdminServer>set('ListenPort', 7001)
wls:/offline/base_domain/Server/AdminServer>create('AdminServer','SSL')
Proxy for AdminServer: Name=AdminServer, Type=SSL
wls:/offline/base_domain/Server/AdminServer>cd('SSL/AdminServer')
wls:/offline/base_domain/Server/AdminServer/SSL/AdminServer>set('Enabled', 'True')
wls:/offline/base_domain/Server/AdminServer/SSL/AdminServer>set('ListenPort', 7002)
wls:/offline/base_domain/Server/AdminServer/SSL/AdminServer>cd('/')
wls:/offline/base_domain>cd('Security/base_domain/User/weblogic')
wls:/offline/base_domain/Security/base_domain/User/weblogic>cmo.setPassword('weblogic1')
wls:/offline/base_domain/Security/base_domain/User/weblogic>setOption('OverwriteDomain', 'true')
wls:/offline/base_domain/Security/base_domain/User/weblogic>writeDomain('/u01/app/oracle/middleware/12.1.3.0/user_projects/domains/CKI_DEV_DOMAIN')
wls:/offline/CKI_DEV_DOMAIN/Security/CKI_DEV_DOMAIN/User/weblogic>closeTemplate()
wls:/offline>exit()
Exiting WebLogic Scripting Tool.
[oracle@msigap1 bin]$
cd /u01/app/oracle/middleware/12.1.3.0/user_projects/domains/CKI_DEV_DOMAIN/bin
./startWebLogic.sh &
./startNodeManager.sh &
http://192.168.1.22:7001/console/
su - root
iptables -I INPUT 1 -i eth0 -p tcp --dport 7001 -j ACCEPT
iptables -I INPUT 1 -i eth0 -p tcp --dport 7002 -j ACCEPT
iptables -I INPUT 1 -i eth0 -p tcp --dport 5556 -j ACCEPT
沒有留言:
張貼留言